Hallo Jetiman,
FLIGHT NUMBER
This function has been included since the previous version, but is explained again here due to some ambiguities.
Reset flight count:
Enter the desired number in the left field (from 0 to 999). This is the number of flights made with the model before using this display app.
If you have noted 55 flights, for example, and want the flight counter to start at 55 from the next flight, enter 55 in this field.
To the right of this field you have to assign a switch with which you "pass" this number to the app. After this switch has been assigned, it has to be pressed at least once, so that the number is transferred to the app and saved.
Now you can delete the assigned switch and set the number to 0 in the left field to avoid an accidental reset of the flight counter to 55 or 0.
Switch for flight count:
Here you can assign a switch to enable or disable the automatic flight counter (e.g. for testing in the workshop).
INFO: The automatic flight counter is triggered by the antenna signal of the Jeti-receiver.
If you use a receiver of a third party manufacturer (e.g. Spektrum) instead of a jeti-receiver in the model, which is directly controlled by the PPM-signal of the jeti-transmitter (internal PPM-jack or PPM-jack), the remote control cannot recognize this receiver. As a consequence, no flight is counted.
TIP: If you want to count the flights with these models automatically, you can use e.g. a Rsat2 or other Jeti-receiver as receiver, which outputs the PPM-signal. The PPM-signal of the jeti-receiver is now fed into the transmitter module of the third party manufacturer (e.g. Spektrum). Thus the jeti transmitter receives a valid receiver signal from the jeti receiver and the flight is automatically counted.
Display-App Version 3.2 Klaus Geiger Page 4
Translated with
www.DeepL.com/Translator
(free version)
Thorn
Topic Author
