Alarms

Is it possible to set an alarm for receiver linkless (i.e. RX switched off) and for a wrong receiver (i.e. model choosed on tx different from the operating model)?
Thanks for help and regards

Antonio

Hallo,

if the receiver is switched off you will get the alarm "Signal loss" and if you have a wrong receiver you get the warning in display of TX "unregistered RX".


Regards

PW

Hi !
Today I mounted the second receiver duplex and I could do some tests.
The alarm signal-lost is activated only when switch off the receiver after switching it on for the first time. What I wanted was a check of the link with the RX when TX is turned on. It happened to launch the model with the RX switched off.
Another useful alarm would be to check the receiver just for the model set on the tx. Currently when you turn on the tx with a receiver of a model different from that set, the radio will notice the difference but not alarm you and asks if you want to bind.
The bind must be possible only with the plug inserted in the receiver, not for mishandling.
If you mistakenly answers "yes" use the program of a different model with all the risks that this entails.
I hope I was clear, my English is very bad and I used google, I apologize.
Thanks.

A friendly greeting


Antonio Ponzo

Hi,

you get the warning in display YES or NO. I think now the user is responsible what he does.


regards

PW

Thank you for your response.
Respect your choices even if you do not agree with.
All other radio behave as I requested.
I think we should give more importance to the safety and because I believe that your TX has the foundation design to be the top I just wanted to give some advice.
If you are right so I adapt.
Thanks to the availability of talking about it.
Regards

Antonio Ponzo